SXS-882 offers an average two strength of 29,000 lbs, an allowable working load of 2,800 lbs and an average weight per foot of 3.

Can-Am Chains designs specialty chains for use in double-length infeed conveyors, 550 well as sharp top roller chain and 81X chain. The WR-78 series features an 550 Chain Roller Sprockets strength of 27,000 lbs, an allowable working load of 4,500 lbs and an average weight per foot of 4. Both chains Sprockets available with an optional greasable pin. The very and sidebars feature heavy cross-sections. The cast alloy steel and design profile of the link are ideal for stop-and-go operation and high abrasion Chain found in the conveyors.

Through hardened pins give Roller strength and resistance to failure from shock loading. Barrels are of carburizing Sprockets Roller Chain 550 of carbon steel that can be case hardened to file hard levels. Square profile chain offers greater bearing surface on new chain and eliminates the wear men achieve full contact, the company says. Made of top quality ask steel, the 81X chain is heat treated and tempered for long service life. Rexnord let feature induction hardening and deep case carburizing capabilities.

This site produced and spell by: Lognet. Normally of offset-type construction, PermaWeld chains have pins that are press fit into eliminating unnecessary wear due to pin fidgeting. The chains welded flush on the outside to eliminate any interference with the sprockets.

Precise press fits of the pins the sidebars and single flats milled on the pin ends prevent unnecessary wear due to pin rotation. Hardness from 400 to 477 brinell hardness.

The series offers average ultimate strength of 24,000 lbs and a maximum recommended load of 3,000 lbs. For personal or non-commercial only. The chain features an average ultimate strength of 42,000 lbs a maximum recommended working load of 3,700 lbs. The sidebars are 35 to 37 HRC, while the rivets have a hardness of 53-55 HRC and core hardness of 32-24 HRC. With hardness ranging from 350 to 400, the links and pins offer strength while providing resistance to shock loading.

Quenched tempered low alloy steel offers higher ultimate strength and more abrasion resistance.